Should You Repair Or Replace Your Water Chiller?

When is it more cost effective to repair your chiller or to replace it? When making this decision there are many things that need to be considered. The very first step that you may want to consider is to figure out the cost of continuing to run the chiller you already have, and compare it to life cycle cost of buying a new one. When making the comparison you should not go off of energy costs alone. The reason for that is because unless the chiller that you are currently running is very old.

When choosing to replace your chiller getting a new one installed the cost can be high. You must include all of the cost of getting a new electrical rough-in, concrete and site work, and demolition. The equipment cost of initially installing the new can come to about five to ten percent of the life cycle costs.

Another factor that needs to be taken into consideration is how reliable the chiller is that you are currently running. You should take into a count the cost of the repairs over the time you have owned the chiller. And how much downtime and then project the figures to future repairs and outages. Then you should factor in the effect of heightened reliability on equipment tied to the chilled-water system, such as air handlers serving critical spaces.

Since you have first purchased your water chiller many things may have changed, your business could have grown and what your business does may have expanded as well. So you may just be deciding weather to add another chiller so that you can lower the supply-water temperatures, or the increased overall system flow. The requirements for keeping up the space humidity, which it can depend on the temperature of your chilled-water supply, or it can depend on the other process requirements. This can quickly justify the need to install new one well before a payback period does.

The next step is to take into consideration the energy costs. To get this information you should calculate the wire-to-water ratio by recording the existing chiller power use in kilowatts (kW) versus delivered tonnage at full capacity. The newer chillers use the wire to water ratio of 0.5 kW per ton (kW/ton). That number is fairly low compared to the older model chillers which use 0.7 kW/ton. When you compare the older model to the newer model it can save you up to fifty percent.

These are all the factors that you should take into consideration when deciding weather or not to repair or replace.

chillers
chiller repair

The Pre-Built Sauna Advantages

In the case where you do not want the expenditure and trouble of installing a permanent sauna in your home, then a pre-built sauna or portable sauna will enable you to get all the sauna benefits with very few negatives.

There are many health benefits that are associated with a portable or pre-built sauna – the steam for one is relaxing and while relaxing you are relieving stress, you are also releasing toxins and free radicals allowing for overall better health. Perhaps the most significant feature of all is the many health benefits associated with regular sauna use.

FIR uses the beneficial warming effects of the sun without the damaging UV, so it’s a safe and useful way to obtain the many health benefits of sauna usage. These benefits can include increased blood circulation, relief from pain, along with toxin removal and many others.

Sweating in your sauna at home is easy – you don’t have to go to the gym, you can do other things while taking your sauna, such as reading and you can do it whenever you want.

Many people are opting for the pre-built and portable infrared sauna because of its abilities to be moved and constructed easily. Now with that said I don’t think you will want to bring your pre-built sauna with you on your next weekend trip, on the other hand if you ever sell your house you can take your sauna along with you.

The pre-built sauna is very easy to construct. They normally come in two or three pieces. They can be put together within an hour. The instructions are very detailed and easy to follow.

Paul Hegarty is the owner of All-About-Saunas.com where you save 60%, on an Infrared Sauna , this includes free shipping.

Find out how a Pre-Built Sauna will work for you. Learn more about the far infrared sauna.

Cleaning a Freshwater Aquarium – Basics of Freshwater Aquarium Maintenance

Cleaning an aquarium is one of the most important steps to ensure that your fish live for a long time. Cleaning an aquarium seems like a messy job but the fact is that with the right cleaning equipment it is possible to clean an aquarium easily. This article will provide information about the right way to clean your aquarium.

Things Needed to Clean an Aquarium

To clean your aquarium you will need a siphon pipe and a sponge. A siphon pipe is used to remove poop and other debris from the gravel along with water. A water python can be used instead of a siphon pipe. The benefit of a water python is that this device can be directly attached the tap and the water can be directly be left in the garden. Water pythons are much longer than regular gravel siphon pipes. The sponge is used to clean the insides of the glass to remove algae and grime. You will also need a clean bucket to remove water and add fresh water.

Cleaning an Aquarium Mess Free

To clean your aquarium you will need to place the bucket on a lower surface than the tank and create suction using the siphon pipe or water python. You will then need to plunge the open ended mouth of the pipe so that poop and other debris are removed. After removing 30% water you should refill the tank using water that matches the temperature of your tank. You will then need to use water conditioners to remove harmful chemicals like chlorine and chloramines from the water. While it is considered safe to directly add the water from the tap to the tank and then add water conditioners, it is always advised to mix the water with the water conditioner in the bucket for the first few times. Aquarium salt can be added to the fresh water in the bucket before you pour the water in. In most cases chemicals that increase or decrease the PH need not be used. These PH related chemicals often do more good than harm.

Things to Know

The purpose of cleaning an aquarium is to ensure that your fish remain healthy. The best way to clean your aquarium is to remove 25 – 30% water every 5 – 7 days and refill it with clean water. Cleaning your aquarium regularly ensures that your fish do not get stressed and fall ill. While cleaning an aquarium you should not clean the filters. Instead you should clean the filters 2 – 3 days after cleaning the aquarium’s water. The reason it is recommended to clean the filter on a different day is because while siphoning the gravel you will be killing some of the beneficial bacteria and by cleaning the filter the same day you will be cleaning more beneficial bacteria. The filter should preferably be cleaned with used tank water so when you clean the aquarium you should keep aside a bucket to clean the filter. Most filters need to be cleaned once in 14 days but external canister filters would need to be cleaned once in 2 months.

Jason MacParland is a freshwater aquarium expert. For more great information on freshwater aquarium maintenance, visit http://www.easyfreshwateraquariumcare.com to learn more about setting up and maintaining a freshwater aquarium.